Installation Instructions

2
2
Load plain A4 paper
a Pull paper tray#1 (the upper tray) a
completely out of the machine.
b Open the paper tray cover a.
c With both hands, gently press and slide the
paper side guides a and then the paper length
guide b to fit the paper size you are loading in
the tray.
Make sure that the triangular marks c on the
paper side guides a and paper length guide b
line up with the mark for the paper size you are
using.
d Fan the stack of paper well to avoid paper jams
and misfeeds.
e Gently put the paper into paper tray#1 print
side down and top edge first. Check that the
paper is flat in the tray.
f Gently adjust the paper side guides to the
paper with both hands. Make sure that the
paper side guides touch the edges of the
paper.
g Close the paper tray cover. Check that the
paper is flat in the tray and below the maximum
paper mark a.
1
1
3
3
2
1
Important
DO NOT push the paper in too far.
1
1