Network User's Guide
Table Of Contents
- NETWERKHANDLEIDING
- Inhoudsopgave
- 1 Inleiding
- 2 De machine configureren voor een netwerk met een Ethernet-kabelverbinding
- Overzicht
- IP-adressen, subnetmaskers en gateways
- Stappenoverzicht
- Het IP-adres en subnetmasker instellen
- De instellingen van de afdrukserver wijzigen
- BRAdmin Light gebruiken om de instellingen van de afdrukserver te wijzigen
- BRAdmin Professional gebruiken om de draadloze instellingen te wijzigen (voor Windows®)
- Remote Setup gebruiken om de instellingen van de afdrukserver te wijzigen (niet beschikbaar voor DCP-modellen)
- Het bedieningspaneel gebruiken om de instellingen van de afdrukserver te wijzigen
- 3 De machine voor een draadloos netwerk configureren (niet mogelijk met MFC-5490CN en MFC-5890CN)
- Overzicht
- Terminologie en concepten voor draadloos netwerk
- Stappenoverzicht voor configuratie van een draadloos netwerk
- Controleren welke netwerkomgeving u hebt
- De configuratiemethode van het draadloze netwerk controleren
- De draadloze machine configureren via de installatiewizard van het bedieningspaneel
- Configuratie via het SES/WPS/AOSS-menu in het bedieningspaneel (alleen in infrastructuurmodus)
- Configuratie via de pinmethode of Wi-Fi Protected Setup™ (alleen in infrastructuurmodus)
- De draadloze netwerkmachine configureren met het installatieprogramma van Brother op de cd-rom
- De machine voor een draadloos netwerk configureren
- De installatiewizard van het bedieningspaneel gebruiken
- De machine configureren voor een draadloos netwerk met het SES/WPS/AOSS- menu op het bedieningspaneel
- De pinmethode of Wi-Fi Protected Setup™ gebruiken
- Het automatische installatieprogramma op de cd-rom gebruiken om de machine voor een draadloos netwerk te configureren
- 4 Draadloze configuratie voor Windows® met behulp van het installatieprogramma van Brother (niet beschikbaar voor MFC-5490CN en MFC-5890CN)
- 5 Draadloze configuratie voor Macintosh® met behulp van het installatieprogramma van Brother (niet beschikbaar voor MFC-5490CN en MFC-5890CN)
- 6 Configuratie van het bedieningspaneel
- Netwerk-menu
- TCP/IP
- Setup Misc. (alleen MFC-5490CN)
- Inst. Wizard (alleen voor draadloze netwerken)
- SES/WPS/AOSS (alleen draadloos netwerk)
- WPS m/Pincode (alleen draadloze netwerken)
- Status WLAN (alleen voor draadloze netwerken)
- Ethernet (alleen voor bedrade netwerken)
- E-mail/I-FAX (voor MFC-6490CW en MFC-6890CDW)
- Scan naar FTP (voor MFC-5890CN en MFC-6490CW)
- Scan naar FTP (voor MFC-6890CDW)
- Time Zone (voor MFC-6490CW en MFC-6890CDW)
- Netwerk I/F (niet beschikbaar voor MFC-5490CN en MFC-5890CN)
- De netwerkinstellingen terugzetten naar de fabrieksinstellingen
- De netwerkconfiguratielijst afdrukken
- Netwerk-menu
- 7 Wizard Driver installeren (alleen Windows®)
- 8 Afdrukken in een netwerk onder Windows® via peer-to-peer TCP/IP
- 9 Vanaf een Macintosh® afdrukken via het netwerk
- 10 Werken met LDAP (voor MFC-6890CDW)
- 11 Internetfaxen en Scan naar E-mail (voor MFC-6490CW en MFC-6890CDW)
- Overzicht internetfaxen
- De verbinding instellen
- Toetsfuncties op het bedieningspaneel
- Een fax via internet verzenden
- Tekst invoeren
- E-mail of een internetfax ontvangen
- Een internetfax op de computer ontvangen
- Ontvangen e-mail en faxberichten doorzenden
- Relay Broadcasting
- TX Verificatiemail
- Setup Mail TX
- Setup Mail RX
- Foutmeldingen
- Belangrijke informatie over internetfaxen
- Overzicht Scan naar e-mail (E-mail server) (MFC-6490CW en MFC-6890CDW)
- Overzicht internetfaxen
- 12 Beveiligingsfuncties (voor MFC-6490CW en MFC-6890CDW)
- 13 Problemen oplossen
- Appendix A
- Services gebruiken
- Andere manieren om het IP-adres in te stellen (voor geavanceerde gebruikers en beheerders)
- DHCP gebruiken voor het configureren van het IP-adres
- BOOTP gebruiken voor het configureren van het IP-adres
- RARP gebruiken voor het configureren van het IP-adres
- APIPA gebruiken voor het configureren van het IP-adres
- ARP gebruiken voor het configureren van het IP-adres
- TELNET-console gebruiken voor het configureren van het IP-adres
- Installeren met gebruik van een op het netwerk gedeelde wachtrij of Share (alleen printerdriver)
- Installatie bij gebruik van Web Services (voor gebruikers van Windows Vista®)
- Appendix B
- Appendix C
- Index
Appendix C
181
C
Original SSLeay License C
Copyright © 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was
written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared
to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc.,
code; not just the SSL code. The SSL documentation included with this distribution is covered by the same
copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this
package is used in a product, Eric Young should be given attribution as the author of the parts of the library
used. This can be in the form of a textual message at program startup or in documentation (online or textual)
provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that
the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgement: "This product includes cryptographic software written by Eric Young
(eay@cryptsoft.com)" The word 'cryptographic' can be left out if the rouines from the library being used are
not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code)
you must include an acknowledgement: "This product includes software written by Tim Hudson
(tjh@cryptsoft.com)"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be
changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU
Public Licence.]










