Network User's Guide
Table Of Contents
- NETWORK USER’S GUIDE
- Table of Contents
- 1 Introduction
- 2 Configuring your machine for a network with an Ethernet cable connection
- Overview
- IP addresses, subnet masks and gateways
- Step by step chart
- Setting up the IP address and subnet mask
- Changing the print server settings
- Using the BRAdmin Light utility to change the print server settings
- Using the BRAdmin Professional utility to change the wireless settings (For Windows®)
- Using the Remote Setup to change the print server settings (Not available for DCP models)
- Using the control panel to change the print server settings
- 3 Configuring your machine for a wireless network (Not available for MFC-5490CN and MFC-5890CN)
- Overview
- Wireless network terms and concepts
- Step by step chart for wireless network configuration
- Confirm your network environment
- Confirm your wireless network setup method
- Configuration using the machine’s control panel Setup Wizard to configure your wireless network machine
- Configuration using the SES/WPS/AOSS control panel menu (Infrastructure mode only)
- Configuration using the PIN Method of Wi-Fi Protected Setup™ (Infrastructure mode only)
- Configuration using the Brother installer application on the CD-ROM to configure your wireless network machine
- Configuring your machine for a wireless network
- 4 Wireless configuration for Windows® using the Brother installer application (Not available for MFC-5490CN and MFC-5890CN)
- 5 Wireless Configuration for Macintosh® using the Brother installer application (Not available for MFC-5490CN and MFC-5890CN)
- 6 Control panel setup
- Network menu
- TCP/IP
- Setup Misc. (MFC-5490CN only)
- Setup Wizard (wireless network only)
- SES/WPS/AOSS (wireless network only)
- WPS w/PIN code (wireless network only)
- WLAN Status (wireless network only)
- Ethernet (wired network only)
- E-mail/I-FAX (For MFC-6490CW and MFC-6890CDW)
- Scan to FTP (For MFC-5890CN and MFC-6490CW)
- Scan to FTP (For MFC-6890CDW)
- Time Zone (For MFC-6490CW and MFC-6890CDW)
- Network I/F (Not available for MFC-5490CN and MFC-5890CN)
- LDAP (For MFC-6890CDW)
- Restoring the network settings to factory default
- Printing the Network Configuration List
- Network menu
- 7 Driver Deployment Wizard (Windows® only)
- 8 Network printing from Windows® basic TCP/IP Peer-to-Peer printing
- 9 Network printing from a Macintosh®
- 10 LDAP operation (For MFC-6890CDW)
- 11 Internet fax and Scan to E-mail (For MFC-6490CW and MFC-6890CDW)
- Internet fax overview
- Getting connected
- Control panel key functions
- Sending an Internet fax
- Manually entering text
- Receiving E-mail or Internet fax
- Receiving an Internet fax to your computer
- Forwarding received E-mail and fax messages
- Relay broadcasting
- TX Verification Mail
- Setup Mail TX
- Setup Mail RX
- Error mail
- Important information on Internet fax
- Scan to E-mail Server overview (MFC-6490CW and MFC-6890CDW)
- Internet fax overview
- 12 Security features (For MFC-6490CW and MFC-6890CDW)
- 13 Troubleshooting
- Appendix A
- Appendix B
- Appendix C
- Index
Appendix B
172
B
Ethernet wireless network B
Network Board
Model name
NC-180w
LAN You can connect your machine to a network for Network Printing, Network
Scanning, and PC Fax Send
1
, PC Fax Receive
1
(Windows
®
only) and Remote
Setup
1
. Also included is Brother BRAdmin Light
2
Network Management software.
Support for
Windows
®
2000 Professional/XP/XP Professional x64 Edition/Windows Vista
®
Mac OS
®
X 10.2.4 or greater
Protocols TCP/IP for IPv4: ARP, RARP, BOOTP, DHCP, APIPA (Auto IP),
NetBIOS/WINS, LPR/LPD, Custom Raw Port/Port9100,
DNS Resolver, mDNS, FTP Server, TELNET, SNMPv1,
TFTP, Scanner Port, Web Services, SMTP Client,
POP before SMTP, SMTP-AUTH, POP3, APOP, FTP Client,
LDAP
4
TCP/IP for IPv6: (Turned off as default) NDP, RA, LPR/LPD,
Custom Raw Port/Port9100, mDNS, FTP Server, TELNET,
SNMPv1, TFTP, Scanner Port, Web Services, SMTP Client,
POP before SMTP, SMTP-AUTH, POP3, APOP, FTP Client,
LDAP
4
Other: LLTD responder
Network Type IEEE 802.11 b/g (Wireless LAN)
Management
utilities
3
BRAdmin Light for Windows
®
2000 Professional, Windows
®
XP,
Windows
®
XP Professional x64 Edition, Windows Vista
®
and
Mac OS
®
X 10.2.4 or greater
BRAdmin Professional for Windows
®
2000 Professional, Windows
®
XP,
Windows
®
XP Professional x64 Edition and Windows Vista
®
Web BRAdmin
3
for Windows
®
2000 Professional, Windows
®
XP,
Windows
®
XP Professional x64 Edition and Windows Vista
®
Client computers with a web browser supporting Java™.
Frequency 2412-2472 MHz
RF channels USA/Canada 1-11
Japan 802.11b: 1-14, 802.11g: 1-13
Others 1-13
Communication
mode
Infrastructure, Ad-hoc (802.11b only)
Data rates 802.11b 11/5.5/2/1 Mbps
802.11g 54/48/36/24/18/12/11/9/6/5.5/2/1 Mbps