User guide

Chapter 11
94
d Press d or c to display Paper Size.
e Press Paper Size.
f Press A4, A5, 10x15cm, Letter,
Legal, A3 or Ledger.
g If you do not want to change additional
settings, press Mono Start or
Color Start.
Tray Select 11
You can change the tray that will be used for
the next copy. To change the default tray see
Tray use in Copy mode on page 29.
a Make sure you are in Copy mode.
b Load your document.
c Enter the number of copies you want.
d Press d or c to display Tray Select.
e Press Tray Select.
f Press Tray#1 or Tray#2.
g If you do not want to change additional
settings, press Mono Start or
Color Start.
Skew Adjustment 11
If your copy is scanned skewed, your
machine can correct the data automatically.
This setting is only available when using the
scanner glass and Enlarge/Reduce is set to
100% copy.
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press d or c to display
Skew Adjustment.
e Press Skew Adjustment.
f Press Auto (or Off).
g If you do not want to change additional
settings, press Mono Start or
Color Start.
Note
• Page Layout, Enlarge/Reduce,
Book Copy and Watermark Copy are
not available with Skew Adjustment.
• You cannot use this setting with Ledger,
A3 or paper smaller than 64 mm × 91 mm.
• This setting is only available for paper that
is rectangular or square.
• Skew Adjustment is only available if the
document is skewed by less than
3 degrees.
• Skew Adjustment may not work
correctly if your document is too thick.