User guide

Making copies
97
11
Note
• Fit to Page, Page Layout,
Book Copy and Watermark Copy are
not available with Duplex Copy.
• You can only use plain paper sizes A4, A5
and Letter.
• Make sure to use Tray#1 to make Duplex
Copy. (See Tray use in Copy mode
on page 29.)
a Press Duplex Copy on the machine’s
panel.
b Press On to turn on the duplex setting.
c Press Portrait Long edge flip,
Portrait Short edge flip,
Landscape Long edge flip or
Landscape Short edge flip.
d Read
How to place the document, and
then press .
e Enter the number of copies you want.
f Load your document.
g Press Mono Start or Color Start.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go to
step h.
h Do one of the following:
 Place the next page on the scanner
glass.
Press Scan. Go to step i.
 After all the pages have been
scanned, press Complete.
i Press Mono Start or Color Start.
The machine starts scanning and
printing the document.
DO NOT touch printed pages until they are
ejected the second time. The machine will
print and eject the first side, and then pull the
paper back in to print the second side.
Note
If your document causes paper jams try
using one of the special duplex copy
settings.
Press Advanced after step b.
Press DX1 or DX2.
DX1 helps avoid paper jams when copying
by allowing more time for the ink to dry.
DX2 allows more time for the ink to dry
while also using less ink.
You can also make Duplex copy from the
LCD.
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press d or c to display Duplex Copy.
e Press Duplex Copy.
f Press On to turn on the duplex setting.
g Press Portrait Long edge flip,
Portrait Short edge flip,
Landscape Long edge flip or
Landscape Short edge flip.
h Read
How to place the document, and
then press .
i Press Mono Start or Color Start.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go to
step j.