User guide

Chapter 11
98
j Do one of the following:
 Place the next page on the scanner
glass.
Press Scan. Go to step k.
 After all the pages have been
scanned, press Complete.
k Press Mono Start or Color Start.
The machine starts scanning and
printing the document.
DO NOT touch printed pages until they are
ejected the second time. The machine will
print and eject the first side, and then pull the
paper back in to print the second side.
Note
If your document causes paper jams try
using one of the special duplex copy
settings.
Press Advanced after step f.
Press DX1 or DX2.
DX1 helps avoid paper jams when copying
by allowing more time for the ink to dry.
DX2 allows more time for the ink to dry
while also using less ink.
Setting your favourites 11
You can store the copy settings that you use
most often by setting them as a favourite. You
can set up to three favourites.
a Press (Copy).
b Choose the copy option and settings
you want to store.
c Press d or c to display
Favorite Settings.
d Press Favorite Settings.
e Press Store.
Note
Set Watermark Copy to Off or
Template when storing
Favorite Settings.
f Press the location where you want to
store your setting for Favorite:1,
Favorite:2 or Favorite:3.
g Do one of the following:
 If you want to rename your setting,
press to delete characters. Then
enter the new name (up to
12 characters).
Press OK. (See Entering Text
on page 193.)
 If you do not want to rename your
setting, press OK.