User Manual

5
5
Set your Country
You must set your country so that the machine works
correctly on local telecommunication lines in each
country
a Check that the power is turned on by plugging
in the power cord and turn the power switch on.
b Press a or b to choose the country.
Ceska republika
Select ab or OK
Press OK when the LCD shows your country.
c The LCD prompts you to make sure of the
country again.
d If the LCD shows the correct country, press 1
to go to step e.
—OR—
Press 2 to go back to step b to choose the
country again.
e After the LCD shows Accepted, the machine
will restart automatically. After the restart, the
LCD shows Please Wait.
6
Choose a Receive Mode
There are four possible receive modes: Fax Only,
Fax/Tel, Manual and External TAD.
a Press Menu, 0, 1.
b Press a or b to choose the receive mode.
Press OK.
c Press Stop/Exit.
For more details, see Using receive modes in
the Basic User's Guide.
Do you want to use the telephone features of your
machine (if available) or an external telephone or
external telephone answering device connected on the
same line as the machine?
Your machine
automatically answers
every call as a fax.
Your machine controls
the line and
automatically answers
every call. If the call is
not a fax, the phone will
ring for you to pick up
the call.
Your external telephone
answering device (TAD)
automatically answers
every call. Voice
messages are stored
on the external TAD.
Fax messages are
automatically printed.
You control the phone
line and must answer
every call yourself.
Do you want the machine to
answer fax and telephone calls
automatically?
Manual
Fax Only
Fax/Tel
External TAD
No
Yes
Yes
No
No
Yes
Are you using the voice message
function of an external telephone
answering device?