User Manual
Table Of Contents
- ADVANCED USER’S GUIDE MFC-7360/MFC-7360N/MFC-7362N/MFC-7460DN/MFC-7470D/MFC-7860DW
- User's Guides and where do I find it?
- Table of Contents
- 1 General Setup
- 2 Security features
- 3 Sending a fax
- 4 Receiving a fax
- Remote Fax Options
- Additional receiving operations
- Polling overview
- 5 Dialling and storing numbers
- 6 Printing reports
- 7 Making copies
- A Routine maintenance
- B Glossary
- Index
- brother ARL/ASA/NZ
Chapter 3
20
Use the chart on Entering text in Appendix C
of the Basic User's Guide for help entering
characters.
Send a cover page for the next fax 3
If you want to send a cover page only for the
next fax, your machine will ask you to enter
the number of pages you are sending so it
can be printed on the cover page.
a Make sure you are in Fax mode .
b Load your document.
c Press Menu, 2, 2, 7.
d Press a or b to choose Next Fax:On
(or Next Fax:Off).
Press OK.
e Press a or b to choose a comment.
Press OK.
f Enter two digits to show the number of
pages you are sending.
Press OK.
For example, enter 0, 2 for 2 pages or
0, 0 to leave the number of pages blank.
If you make a mistake, press d or Clear
to back up and re-enter the number of
pages.
Send a cover page for all faxes 3
You can set the machine to send a cover
page whenever you send a fax.
a Make sure you are in Fax mode .
b Press Menu, 2, 2, 7.
c Press a or b to choose On (or Off).
Press OK.
d Press a or b to choose a comment.
Press OK.
Using a printed cover page 3
If you want to use a printed cover page that
you can write on, you can print the sample
page and attach it to your fax.
a Make sure you are in Fax mode .
b Press Menu, 2, 2, 7.
c Press a or b to choose Print Sample.
Press OK.
d Press Start.
e After the machine prints a copy of your
cover page, press Stop/Exit.