User Manual

56
Manual fax
When you press Hook or Hook/Hold or lift
the handset of your external telephone or
the machine (MFC-7470D only) so you
can hear the receiving fax machine
answer before you press Start to begin
transmission.
Menu mode
Programming mode for changing your
machine’s settings.
OCR (optical character recognition)
ScanSoft™ PaperPort™ 12SE with OCR
or Presto! PageManager software
application converts an image of text to
text you can edit.
One Touch
Keys on the machine’s control panel
where you can store numbers for easy
dialling. You can store a second number
on each key if you press Shift and the
One Touch key together.
Out of Paper Reception
Receives faxes into the machine’s
memory when the machine is out of paper.
Overseas Mode
Makes temporary changes to the fax
tones to accommodate noise and static on
overseas telephone lines.
Pause
Allows you to place a 3.5 second delay in
the dialling sequence while you are
dialling using the dial pad or while you are
storing One Touch and Speed Dial
numbers. Press Redial/Pause as many
times as needed for longer pauses.
Polling
The process of a fax machine calling
another fax machine to retrieve waiting fax
messages.
Pulse
A form of rotary dialling on a telephone
line.
Real Time Transmission
When memory is full, you can send faxes
in real time.
Remaining Jobs
You can check which programmed fax
jobs are waiting in the memory and cancel
the jobs individually.
Remote Access Code
Your own four-digit code (– – –l) that
allows you to call and access your
machine from a remote location.
Remote Activation code
Press this code (l51) (l91 for New
Zealand) when you answer a fax call on
an extension or external telephone.
Remote Retrieval Access
The ability to access your machine
remotely from a touch tone telephone.
Resolution
The number of vertical and horizontal lines
per inch.
Ring Delay
The number of rings before the machine
answers in Fax Only and Fax/Tel
modes.
Ring Volume
Volume setting for the machine’s ring.
Scanning
The process of sending an electronic
image of a paper document into your
computer.
Speed Dial
A pre-programmed number for easy
dialling. Press (Address Book), then
enter the three-digit Speed Dial location
and press Start to begin the dialling
process.
Station ID
The stored information that appears on
the top of faxed pages. It includes the
sender’s name and fax number.