User Manual

Chapter 3
14
Changing Fax Resolution 3
The quality of a fax can be improved by
changing the Fax Resolution. Resolution can
be changed for the next fax or for all faxes.
To change the Fax Resolution setting
for the next fax
3
a Make sure you are in Fax mode .
b Load your document.
c Press Resolution, then a or b to
choose the resolution.
Press OK.
To change the default Fax Resolution
setting
3
a Make sure you are in Fax mode .
b Press Menu, 2, 2, 2.
c Press a or b to choose the resolution
you want.
Press OK.
Note
You can choose four different resolution
settings.
Additional sending
operations 3
Sending a fax manually 3
Manual transmission 3
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
a Make sure you are in Fax mode .
b Load your document.
c Pick up the handset of an external
telephone or the machine (MFC-7470D
only) and listen for a dial tone.
d Dial the fax number you want to call.
e When you hear the fax tone, press
Start.
 If you are using the scanner glass,
press 1 to send a fax.
f If you picked up the handset of an
external telephone or the machine
(MFC-7470D only), replace it.
Dual access 3
You can dial a number and start scanning the fax
into memory—even when the machine is
sending from memory, receiving faxes or printing
PC data. The LCD will show the new job number.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel scanning. If you get an
Out of Memory message while scanning
a subsequent page, you can press
Start to
send the pages scanned so far, or press
Stop/Exit to cancel the operation.
fax resolution
Standard Suitable for most typed
documents.
Fine Good for small print and
transmits a little slower than
Standard resolution.
S.Fine Good for small print or artwork
and transmits slower than Fine
resolution.
Photo Use when the document has
varying shades of grey or is a
photograph. This has the
slowest transmission time.