User Manual

Chapter 4
30
d Enter a four-digit secure code.
Press OK.
This is the security code of the fax
machine you are polling.
e Enter the fax number you are polling.
f Press Start.
Delayed polling 4
Delayed polling lets you set the machine to
begin polling receive at a later time. You can
only set up one delayed polling operation.
a Make sure you are in Fax mode .
b For MFC-7360 / MFC-7360N /
MFC-7460DN, press Menu, 2, 1, 8.
For MFC-7470D / MFC-7860DW, press
Menu, 2, 1, 7.
c Press a or b to choose Timer.
Press OK.
d Enter the time (in 24-hour format) you
want to begin polling.
For example, enter 21:45 for 9:45 PM.
Press OK.
e Enter the fax number you are polling.
Press Start.
The machine makes the polling call at
the time you entered.
Sequential polling 4
Sequential polling lets you request
documents from several fax machines in one
operation.
a Make sure you are in Fax mode .
b For MFC-7360 / MFC-7360N /
MFC-7460DN, press Menu, 2, 1, 8.
For MFC-7470D / MFC-7860DW, press
Menu, 2, 1, 7.
c Press a or b to choose Standard,
Secure or Timer.
Press OK.
d Choose one of the options below.
 If you choose Standard go to step
e.
 If you choose Secure, enter a
four-digit number, press OK, go to
step e.
 If you chose Timer, enter the time
(in 24-hours format) you want to
begin polling and press OK, go to
step e.
e Specify the destination fax machines
you want to poll by using One Touch,
Speed Dial, Search, a Group or the dial
pad. You must press OK between each
location.
f Press Start.
Stop polling 4
To cancel the polling process, Stop/Exit
while the machine is dialling.
To cancel all sequential polling receive jobs,
press Menu, 2, 7. (See Checking and
cancelling waiting jobs on page 17.)