Network User's Guide

Configuring your machine for a wireless network (For HL-2280DW, DCP-7055W, DCP-7057W, DCP-7070DW and MFC-7860DW)
19
3
l Enter the WEP key you wrote down in step a. Press OK. Go to step o. (For information how to enter
text, see the Quick Setup Guide.)
Network Key
m Choose the Encryption type, TKIP or AES using a or b. Press OK. Go to step n.
Encryption Type?
TKIP
n Enter the WPA key you wrote down in step a and press OK. Go to step o. (For information how to enter
text, see the Quick Setup Guide.)
o To apply the settings, choose Yes. To cancel, choose No.
Apply Settings?
1.Yes 2.No
Do one of the following:
If you chose Yes, go to step p.
If you chose No, go back to step g.
p The machine starts to connect to the wireless device you have chosen.
q If your wireless device is connected successfully, the display shows Connected.
The machine will print the WLAN Report. If the connection failed, check the error code on the printed
report and refer to Troubleshooting in the Quick Setup Guide.
Connected
Printing
(Windows
®
)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Start Here OSX from the
CD-ROM menu.