User Manual
Table Of Contents
- Quick Setup Guide MFC-7360/MFC-7360N/MFC-7362N/MFC-7460DN/MFC-7470D
- Start Here
- 1 Unpack the machine and check the components
- 2 Remove the packing material from the machine
- 3 Install the Handset (MFC-7470D only)
- 4 Load paper in the paper tray
- 5 Connect the power cord and telephone line
- 6 Set your country (for Australia/ New Zealand/South Africa/ Others customer only)
- 7 Choose a Receive Mode
- 8 Set the LCD contrast (if needed)
- 9 Set the date and time
- 10 Enter personal information (station ID)
- 11 Fax Transmission Report
- 12 Set tone or pulse dialling mode (not available in New Zealand)
- 13 Set the telephone line compatibility
- 14 Set the telephone line type (Middle East and Africa only)
- 15 Dial Prefix (not available in Middle East and Africa)
- 16 Set Daylight Saving Time (Oceania and Asia only)
- 17 Automatic Daylight Savings Time (Middle East and Africa only)
- 18 Choose your connection type
- For USB Interface Users (Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista®/Windows® 7)
- For USB Interface Users (Mac OS X 10.4.11 - 10.6.x)
- For Wired Network Interface Users (MFC-7360N / MFC-7362N / MFC-7460DN only) (Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista®/Windows® 7)
- For Wired Network Interface Users (MFC-7360N / MFC-7362N / MFC-7460DN only) (Mac OS X 10.4.11 - 10.6.x)
- For Network Users (MFC-7360N / MFC-7362N / MFC-7460DN only)
- Other Information
- Consumables
- brother ARL/ASA/NZ/SAF/GLF
- Start Here
16
Macintosh
USB
For USB Interface Users
(Mac OS X 10.4.11 - 10.6.x)
19
Before you install
a Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
b Connect the USB cable to the USB connector
marked with the symbol on your machine
and then connect the cable to your Macintosh.
c Make sure your machine’s power switch is on.
20
Install MFL-Pro Suite
a Put the installation CD-ROM into your
CD-ROM drive.
b Double-click the Start Here OSX icon. Follow
the on-screen instructions.
c Follow the on-screen instructions until this
screen appears. Choose your machine from
the list, and then click OK.
d When this screen appears, click Next.
IMPORTANT
For Mac OS X 10.4.10 users, upgrade to
Mac OS X 10.4.11 - 10.6.x. (For the latest
drivers and information on the Mac OS X you
are using, visit http://solutions.brother.com/
.)
Note
(MFC-7470D only) If you want to install the PS
driver (BR-Script3 printer driver), please go to the
Brother Solutions Center at
http://solutions.brother.com/
, click Downloads on
your model page and visit FAQ's for setup
instructions.
Note
It may take a few minutes for installation to
complete.
The installation of MFL-Pro Suite is now
complete.
Go to step 21 on page 17.