User Manual
Table Of Contents
- Quick Setup Guide MFC-7360/MFC-7360N/MFC-7362N/MFC-7460DN/MFC-7470D
- Start Here
- 1 Unpack the machine and check the components
- 2 Remove the packing material from the machine
- 3 Install the Handset (MFC-7470D only)
- 4 Load paper in the paper tray
- 5 Connect the power cord and telephone line
- 6 Set your country (for Australia/ New Zealand/South Africa/ Others customer only)
- 7 Choose a Receive Mode
- 8 Set the LCD contrast (if needed)
- 9 Set the date and time
- 10 Enter personal information (station ID)
- 11 Fax Transmission Report
- 12 Set tone or pulse dialling mode (not available in New Zealand)
- 13 Set the telephone line compatibility
- 14 Set the telephone line type (Middle East and Africa only)
- 15 Dial Prefix (not available in Middle East and Africa)
- 16 Set Daylight Saving Time (Oceania and Asia only)
- 17 Automatic Daylight Savings Time (Middle East and Africa only)
- 18 Choose your connection type
- For USB Interface Users (Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista®/Windows® 7)
- For USB Interface Users (Mac OS X 10.4.11 - 10.6.x)
- For Wired Network Interface Users (MFC-7360N / MFC-7362N / MFC-7460DN only) (Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista®/Windows® 7)
- For Wired Network Interface Users (MFC-7360N / MFC-7362N / MFC-7460DN only) (Mac OS X 10.4.11 - 10.6.x)
- For Network Users (MFC-7360N / MFC-7362N / MFC-7460DN only)
- Other Information
- Consumables
- brother ARL/ASA/NZ/SAF/GLF
- Start Here
4
2
Remove the packing
material from the
machine
a Remove the packing tape from the outside of
the machine and the film covering the scanner
glass.
b Open the front cover.
c Remove the Silica Pack from the inside of the
machine.
CAUTION
CAUTION
DO NOT eat the Silica Pack. Please discard.
If ingested seek medical attention immediately.
d Lift the elastic band off the drum.
e Pull the paper strip to remove the protective
material as shown in the illustration.
f Take out the drum unit and toner cartridge
assembly.
IMPORTANT
DO NOT connect the AC power cord yet.