User Manual
Table Of Contents
- Quick Setup Guide MFC-7360/MFC-7360N/MFC-7362N/MFC-7460DN/MFC-7470D
- Start Here
- 1 Unpack the machine and check the components
- 2 Remove the packing material from the machine
- 3 Install the Handset (MFC-7470D only)
- 4 Load paper in the paper tray
- 5 Connect the power cord and telephone line
- 6 Set your country (for Australia/ New Zealand/South Africa/ Others customer only)
- 7 Choose a Receive Mode
- 8 Set the LCD contrast (if needed)
- 9 Set the date and time
- 10 Enter personal information (station ID)
- 11 Fax Transmission Report
- 12 Set tone or pulse dialling mode (not available in New Zealand)
- 13 Set the telephone line compatibility
- 14 Set the telephone line type (Middle East and Africa only)
- 15 Dial Prefix (not available in Middle East and Africa)
- 16 Set Daylight Saving Time (Oceania and Asia only)
- 17 Automatic Daylight Savings Time (Middle East and Africa only)
- 18 Choose your connection type
- For USB Interface Users (Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista®/Windows® 7)
- For USB Interface Users (Mac OS X 10.4.11 - 10.6.x)
- For Wired Network Interface Users (MFC-7360N / MFC-7362N / MFC-7460DN only) (Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista®/Windows® 7)
- For Wired Network Interface Users (MFC-7360N / MFC-7362N / MFC-7460DN only) (Mac OS X 10.4.11 - 10.6.x)
- For Network Users (MFC-7360N / MFC-7362N / MFC-7460DN only)
- Other Information
- Consumables
- brother ARL/ASA/NZ/SAF/GLF
- Start Here
6
4
Load paper in the paper
tray
a Pull the paper tray completely out of the
machine.
b While pressing the green paper-guide release
lever a, slide the paper guides to fit the paper
size you are loading in the tray. Make sure that
the guides are firmly in the slots.
c Fan the stack of paper well to avoid paper jams
and misfeeds.
d Put paper in the tray and make sure:
The paper is below the maximum paper
mark (bbb) a.
Over filling the paper tray will cause paper
jams.
The side to be printed on must be face down.
The paper guides touch the sides of the
paper so it will feed correctly.
e Put the paper tray firmly back in the machine.
Make sure that it is completely inserted into the
machine.
1
11