User Manual

Chapter 5
38
l Press a or b to select 200dpi or
200x100dpi.
Press OK.
 If you chose Email B&W PDF, go to
step m.
 If you chose Email B&W TIFF, go
to step n.
m Select the PDF type from PDF or SPDF
(Secure PDF) that will be used to send
to your PC.
Press OK and then go to step n.
n Press Stop/Exit.
Note
• When you do a broadcast and you have
saved a scan profile along with the
number or E-mail address, the scan profile
of the One-Touch, Speed-Dial or Group
number you chose first will be applied to
the broadcast.
• For details about the file format, see the
Software User’s Guide.
• If you have selected Fax/IFAX in step d
and added One-Touch or Speed-Dial
numbers that are stored as 'IFax', you
cannot select S.Fine.
Changing Group numbers 5
If you try to change a Group number, the LCD
will show the name or number already stored
there.
a Press Menu, 2, 3, 3.
Address Book
3.Setup Groups
b Choose the One Touch key or Speed
Dial number where the Group number is
stored.
Do one of the following:
 Press the One Touch key.
 Press (Address Book) and then
enter the three-digit Speed Dial
number.
Press OK.
Note
If the Group number you are trying to
change has been set to a fax forwarding
number, the LCD will ask you if you want
to change the name or number.
c Do one of the following:
 To change the stored Group
information, press 1. Go to step d.
 To exit without making a change,
press Stop/Exit.
G01:*001*002#001
1.Change 2.Clear
d Add or delete One Touch or Speed Dial
numbers by following the instructions
below:
 To add One Touch numbers,
press d or c to position the cursor
just after the last number. Then press
the additional One Touch key.