User Manual
Table Of Contents
- Quick Setup Guide MFC-7360N/MFC-7460DN
- Start Here
- 1 Unpack the machine and check the components
 - 2 Remove the packing material from the machine
 - 3 Load paper in the paper tray
 - 4 Connect the power cord and telephone line
 - 5 Choose a Receive Mode
 - 6 Set the LCD contrast (if needed)
 - 7 Set the date and time
 - 8 Enter personal information (station ID)
 - 9 Fax Transmission Report
 - 10 Set tone or pulse dialling mode
 - 11 Set the telephone line compatibility
 - 12 Set the telephone line type
 - 13 Automatic Daylight Savings Time
 - 14 Choose your connection type
 
 - For USB Interface Users (Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista®/Windows® 7)
 - For USB Interface Users (Mac OS X 10.4.11 - 10.6.x)
 - For Wired Network Interface Users (Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista®/Windows® 7)
 - For Wired Network Interface Users (Mac OS X 10.4.11 - 10.6.x)
 - For Network Users
 - Other Information
 - Consumables
 - brother UK/IRE/SAF
 
 - Start Here
 
19
Macintosh
Wired Network
Windows
®
Macintosh
Wired Network
d When this screen appears, click Next.
17
Download and install 
Presto! PageManager
When Presto! PageManager is installed OCR 
capability is added to Brother ControlCenter2. You 
can easily scan, share and organize photos and 
documents using Presto! PageManager.
On the Brother Support screen, click 
Presto! PageManager and follow the on-screen 
instructions.
18
Install MFL-Pro Suite on 
additional computers 
(if needed)
If you want to use your machine with multiple 
computers on the network, install MFL-Pro Suite on 
each computer. Go to step 16 on page 18.
Note
• You can find your machine’s MAC Address 
(Ethernet Address) and IP Address by printing 
out the Network Configuration Report. See Print 
the Network Configuration Report on page 20.
• If this screen appears click OK.
Enter a name for your Macintosh in 
Display Name up to 15 characters long and 
click OK. Go to d.
• If you want to use the machine’s SCAN key to 
scan over the network, you must check the 
Register your computer with the "Scan To" 
function on the machine box.
• The name you enter will appear on the 
machine’s LCD when you press  (SCAN) 
and choose a scan option. (For more 
information, see Network Scanning in the 
Software User's Guide.)
The installation of MFL-Pro Suite is now 
complete. 
Go to step 17 on page 19.
Finish
The installation is now 
complete.
Note
If you use a specified IP Address for the machine, 
you must set the Boot Method to Static by using 
the control panel. For more information, see 
Network menu in the Network User's Guide.










