User Manual
Table Of Contents
- Quick Setup Guide MFC-7360N/MFC-7460DN
- Start Here
- 1 Unpack the machine and check the components
- 2 Remove the packing material from the machine
- 3 Load paper in the paper tray
- 4 Connect the power cord and telephone line
- 5 Choose a Receive Mode
- 6 Set the LCD contrast (if needed)
- 7 Set the date and time
- 8 Enter personal information (station ID)
- 9 Fax Transmission Report
- 10 Set tone or pulse dialling mode
- 11 Set the telephone line compatibility
- 12 Set the telephone line type
- 13 Automatic Daylight Savings Time
- 14 Choose your connection type
- For USB Interface Users (Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista®/Windows® 7)
- For USB Interface Users (Mac OS X 10.4.11 - 10.6.x)
- For Wired Network Interface Users (Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista®/Windows® 7)
- For Wired Network Interface Users (Mac OS X 10.4.11 - 10.6.x)
- For Network Users
- Other Information
- Consumables
- brother UK/IRE/SAF
- Start Here
3
2
Remove the packing
material from the
machine
a Remove the packing tape from the outside of
the machine and the film covering the scanner
glass.
b Open the front cover.
c Remove the Silica Pack from the inside of the
machine.
CAUTION
CAUTION
DO NOT eat the Silica Pack. Please discard.
If ingested seek medical attention immediately.
d Lift the elastic band off the drum.
e Pull the paper strip to remove the protective
material as shown in the illustration.
f Take out the drum unit and toner cartridge
assembly.
IMPORTANT
DO NOT connect the AC power cord yet.