Network Glossary

Table Of Contents

Additional network settings from Windows

Network printing installation for Infrastructure mode when

using Vertical Pairing (Windows

7) 4

Windows

Vertical Pairing is a technology to allow your Vertical Pairing supported wireless machine to

connect to your Infrastructure network using the PIN Method of Wi-Fi Protected Setup and the Web Services

feature. This also enables the printer driver installation from the printer icon that is in the Add a device

screen.

If you are in Infrastructure mode, you can connect your machine to the wireless network and then install the

printer driver using this feature. Follow the steps below:

Note

• If you have set your machine’s Web Services feature to Off, you must set back to On. The default setting

of the Web Services for the Brother machine is On. You can change the Web Services setting by using

the Web Based Management (web browser) or BRAdmin Professional 3.

• Make sure your WLAN access point/router includes the Windows

7 compatibility logo. If you are not sure

about the compatibility logo, contact your access point/router manufacturer.

• Make sure your computer includes Windows

7 compatibility logo. If you are not sure about the

compatibility logo, contact your computer manufacturer.

• If you are configuring wireless network using an external wireless NIC (Network Interface Card), make

sure the wireless NIC includes Windows

7 compatibility logo. For more information, contact your wireless

NIC manufacturer.

• To use a Windows

7 computer as a Registrar, you need to register it to your network in advance. See the

instruction supplied with your WLAN access point/router.

a Turn on your machine.

b Set your machine in Wi-Fi Protected Setup (PIN Method).

See Wi-Fi Protected Setup (PIN Method) wireless configuration in the Network User's Guide, on how to

set your machine in the PIN Method.

c Click the button and then Devices and Printers.

d Choose Add a device on the Devices and Printers dialog.

e Choose your machine and input the PIN which your machine has indicated.

f Choose the Infrastructure network that you want to connect to, and then click Next.

g When your machine appears in the Devices and Printers dialog, the wireless configuration and the

printer driver installation are successfully completed.