User Manual
Table Of Contents
- BASIC USER’S GUIDE MFC-7360/MFC-7360N/MFC-7362N/MFC-7460DN/MFC-7470D/MFC-7860DW
- User’s Guides and where do I find it?
- Table of Contents
- 1 General information
- 2 Loading paper
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Telephone and external devices
- Voice operations (MFC-7470D only)
- Telephone line services
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD
- External and extension telephones
- 7 Dialling and storing numbers
- 8 Making copies
- 9 How to print from a computer
- 10 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Menu and features
- D Specifications
- Index
Routine maintenance
69
A
f Put the toner cartridge firmly into the
new drum unit until it locks into place. If
you put the cartridge in properly, the
green lock lever will lift automatically.
Note
Make sure that you put in the toner
cartridge correctly or it may separate from
the drum unit.
g Clean the corona wire of the drum unit
by gently sliding the green tab from left
to right and right to left several times.
Note
Be sure to return the green tab to the
home position (a) (1). If you do not, printed
pages may have a vertical stripe.
h Put the new drum unit and toner
cartridge assembly in the machine.
Resetting the drum counter A
When you replace the drum unit with a new
one, you need to reset the drum counter by
completing the following steps:
a Press Clear.
To confirm you are installing a new drum
unit, press 1.
b When the LCD shows Accepted, close
the front cover.
1