User`s guide
Table Of Contents
- Network USER’S GUIDE
- Table of contents
- 1.Introduction
- 2.Configuring your network printer
- 3.Front Panel Setup
- 4.Network printing from Windows®: basic TCP/IP Peer-to-Peer printing
- 5.Internet printing for Windows®
- 6.Network printing from Macintosh®
- 7.Web Based Management
- 8.Troubleshooting
- Appendix A
- Using services
- Other ways to set the IP address (for advanced users and administrators)
- Using DHCP to configure the IP address
- Using BOOTP to configure the IP address
- Using RARP to configure the IP address
- Using APIPA to configure the IP address
- Using ARP to configure the IP address
- Using the TELNET console to configure the IP address
- Using the Brother Web BRAdmin server software for IIS* to configure the IP address
- Print/Scan Server specifications
- Function Table and Default Factory Settings
- Index
6
6 - 1
6
Network printing from Macintosh
®
Overview
This chapter explains how to configure the PostScript driver on a Network. For more information on how to
configure the default Quick Draw driver on a Network. see the Quick Setup Guide included with the machine.
How to select the print server (TCP/IP) (Mac OS
®
9.1 - 9.2)
1
Open the Applications (Mac OS® 9) folder.
2
Open the Utilities folder.
3
Open the Desktop Printer Utility icon.
4
Select the Printer (LPR) option and click OK.
5
At this point we must select the correct PPD file for the
machine and also configure the correct LPR information.
Click Change in the PostScript Printer Description
(PPD) File section and select the appropriate PPD file for
your model.