User`s guide
Table Of Contents
- Network USER’S GUIDE
- Table of contents
- 1.Introduction
- 2.Configuring your network printer
- 3.Front Panel Setup
- 4.Network printing from Windows®: basic TCP/IP Peer-to-Peer printing
- 5.Internet printing for Windows®
- 6.Network printing from Macintosh®
- 7.Web Based Management
- 8.Troubleshooting
- Appendix A
- Using services
- Other ways to set the IP address (for advanced users and administrators)
- Using DHCP to configure the IP address
- Using BOOTP to configure the IP address
- Using RARP to configure the IP address
- Using APIPA to configure the IP address
- Using ARP to configure the IP address
- Using the TELNET console to configure the IP address
- Using the Brother Web BRAdmin server software for IIS* to configure the IP address
- Print/Scan Server specifications
- Function Table and Default Factory Settings
- Index
Network printing from Macintosh®
6 - 4
6
Changing the configuration using a web browser
From a Macintosh
®
, the easiest way to change the printer or print/scan server parameters is to use a web
browser.
Simply connect to the printer using the format: http://ip_address where ip_address is the address of
the printer.
See Using the HTTP (web browser) and the TCP/IP protocol to change the print/scan server settings on page
2-5.
Other sources of information
1
Visit http://solutions.brother.com for more information on network printing.
2
See Chapter 2 of this User’s Guide to learn how to configure the IP address of the printer.