User`s guide
Table Of Contents
- Network USER’S GUIDE
- Table of contents
- 1.Introduction
- 2.Configuring your network printer
- 3.Front Panel Setup
- 4.Network printing from Windows®: basic TCP/IP Peer-to-Peer printing
- 5.Internet printing for Windows®
- 6.Network printing from Macintosh®
- 7.Web Based Management
- 8.Troubleshooting
- Appendix A
- Using services
- Other ways to set the IP address (for advanced users and administrators)
- Using DHCP to configure the IP address
- Using BOOTP to configure the IP address
- Using RARP to configure the IP address
- Using APIPA to configure the IP address
- Using ARP to configure the IP address
- Using the TELNET console to configure the IP address
- Using the Brother Web BRAdmin server software for IIS* to configure the IP address
- Print/Scan Server specifications
- Function Table and Default Factory Settings
- Index
Appendix A
A - 7
A
Function Table and Default Factory Settings
*1: The factory setting for IP Address and Subnet Mask may be changed by the APIPA setting.
LEVEL
ONE
LEVEL
TWO
LEVEL THREE OPTIONS OPTIONS FACTORY SETTING
5.LAN 1.Setup
TCP/IP
1.BOOT Method Auto/ Static/ RARP/ BOOTP/ DHCP Auto
2.IP Address [000-255].[000-255].[000-255].[000-255] [169].[254].[001-254].
[000-255]
3.Subnet Mask [000-255].[000-255].[000-255].[000-255] 255.255.0.0
4.Gateway [000-255].[000-255].[000-255].[000-255] 000.000.000.000
5.Host Name BRN_XXXXXX=(last 6 figures of Ethernet
address)
(up to 15 characters)
BRN_XXXXXX BRN_XXXXXX
6.WINS Config Auto/ Static Auto
7.WINS Server (Primary)
[000-255].[000-255].[000-255].[000-255]
(Secondary)
[000-255].[000-255].
[000-255].[000-255]
000.000.000.000
8.DNS Server (Primary)
[000-255].[000-255].[000-255].[000-255]
(Secondary)
[000-255].[000-255].
[000-255].[000-255]
000.000.000.000
9.APIPA On/Off On
2. Setup
Misc.
1.Ethernet Auto/ 100B-FD/ 100B-HD/ 10B-FD/
10B-HD
Auto
0.Factory
Reset
-