User Manual

Scanning
47
3
 256 Colour
Uses up to 256 colours to scan the image.
 24bit Colour
Uses up to 16.8 million colours to scan the image.
Although using 24bit Colour creates an image with the most accurate colour, the image file will be about
three times larger than a file created with 256 Colour. It requires the most memory and has the longest
transfer time.
Reduce Noise 3
You can improve and enhance the quality of your scanned images with this selection. The Reduce Noise
setting is available when using 24bit Colour and scan resolutions of 300 × 300 dpi, 400 × 400 dpi or 600 ×
600 dpi.
Brightness 3
Adjust the setting (-50 to 50) to get the best image. The default value is 0, representing an average.
You can set the Brightness level by dragging the slider to the right or left to lighten or darken the image. You
can also enter a value in the box to set the level.
If the scanned image is too light, set a lower Brightness level and scan the document again. If the image is
too dark, set a higher Brightness level and scan the document again.
Note
The Brightness setting is not available when 256 Colour is chosen.
Contrast 3
You can increase or decrease the Contrast level by moving the slider to the left or right. An increase
emphasizes dark and light areas of the image, while a decrease reveals more detail in grey areas. You can
also enter a value in the box to set the Contrast.
Note
The Contrast setting is only available when Grey (Error Diffusion), True Grey or 24bit Colour is chosen.
When scanning photographs or other images for use in a word processor or other graphics application, try
different settings for the contrast and resolution to see which setting best suits your needs.
Document Size 3
Choose one of the following sizes:
 A4 210 x 297 mm (8.3 x 11.7 in)
 JIS B5 182 x 257 mm (7.2 x 10.1 in)
 Letter 215.9 x 279.4 mm (8 1/2 x 11 in)
 Legal 215.9 x 355.6 mm (8 1/2 x 14 in)
 A5 148 x 210 mm (5.8 x 8.3 in)