Network User's Guide
Table Of Contents
- INSTRUKCJA OBSŁUGI DLA SIECI
- Spis Treści
- 1 Wprowadzenie
- 2 Konfigurowanie urządzenia pod kątem sieci z połączeniem przewodowym Ethernet (niedostępne w przypadku urządzeń MFC-253CW, MFC-255CW oraz MFC-257CW)
- Przegląd
- Adresy IP, maski podsieci i bramy
- Tabela krok po kroku
- Ustawianie adresu IP i maski podsieci
- Zmiana ustawień serwera wydruku
- Zmiana ustawień serwera wydruku za pomocą narzędzia BRAdmin Light
- Zmiana ustawień sieci bezprzewodowej za pomocą narzędzia BRAdmin Professional 3 (Windows®)
- Zmiana ustawień serwera wydruku za pomocą funkcji Zdalny rozruch (niedostępne w przypadku systemu Windows Server® 2003/2008) (niedostępne w przypadku modeli DCP, MFC-253CW, MFC-255CW, MFC-257CW oraz MFC-295CN)
- Zmiana ustawień serwera wydruku za pomocą panelu sterowania
- 3 Konfigurowanie urządzenia pod kątem działania w sieci bezprzewodowej (niedostępne w przypadku urządzeń DCP-365CN, DCP-395CN oraz MFC-295CN)
- Przegląd
- Terminologia i pojęcia dotyczące sieci bezprzewodowej
- Tabela konfiguracji sieci bezprzewodowej krok po kroku
- Potwierdź otoczenie sieciowe
- Potwierdź metodę konfiguracji sieci bezprzewodowej
- Konfiguracja urządzenia do pracy w sieci bezprzewodowej za pomocą kreatora konfiguracji z poziomu panelu sterowania urządzenia
- Konfiguracja za pomocą menu panelu sterowania SES/WPS/AOSS (tylko tryb Infrastrukturalny)
- Konfiguracja za pomocą metody PIN funkcji Wi-Fi Protected Setup™ (tylko tryb Infrastrukturalny)
- Konfiguracja urządzenia do pracy w sieci bezprzewodowej za pomocą instalatora Brother na płycie CD
- Skonfiguruj urządzenie do pracy w sieci bezprzewodowej
- Użycie kreatora konfiguracji z panelu sterowania
- Konfiguracja urządzenia do pracy w sieci bezprzewodowej za pomocą menu panelu sterowania SES, WPS lub AOSS
- Używanie metody PIN trybu Wi-Fi Protected Setup™
- Konfiguracja urządzenia do pracy w sieci bezprzewodowej za pomocą automatycznego instalatora Brother na płycie CD
- 4 Konfiguracja bezprzewodowa dla systemu Windows® z wykorzystaniem aplikacji instalatora Brother (w przypadku modeli DCP-373CW, DCP-375CW, DCP-377CW, DCP-593CW, DCP-595CW, DCP-597CW, MFC-495CW oraz MFC-795CW)
- 5 Konfiguracja bezprzewodowa dla komputerów Macintosh z wykorzystaniem instalatora Brother (w przypadku modeli DCP-373CW, DCP-375CW, DCP-377CW, DCP-593CW, DCP-595CW, DCP-597CW, MFC-495CW oraz MFC-795CW)
- 6 Konfigurowanie urządzenia za pomocą panelu sterowania
- Menu sieci
- TCP/IP
- Kreator konfiguracji (dla modeli bezprzewodowych)
- SES/WPS/AOSS (dla modeli bezprzewodowych)
- WPS z kodem PIN (dla modeli bezprzewodowych)
- Stan sieci WLAN (dla modeli bezprzewodowych)
- Sieć Ethernet (niedostępne w przypadku modeli MFC-253CW, MFC-255CW oraz MFC-257CW)
- Adres MAC
- Interfejs sieciowy (w przypadku modeli bezprzewodowych, niedostępne w przypadku modeli MFC-253CW, MFC-255CW oraz MFC-257CW)
- WLAN (w przypadku modeli MFC-253CW, MFC-255CW oraz MFC-257CW)
- Przywracanie ustawień sieci do fabrycznych ustawień domyślnych
- Drukowanie listy konfiguracji sieci
- Menu sieci
- 7 Kreator instalacji sterowników (tylko Windows®)
- 8 Drukowanie sieciowe w systemie Windows® - podstawowe drukowanie Peer-to-Peer TCP/IP
- 9 Drukowanie sieciowe w przypadkukomputerów Macintosh
- 10 Rozwiązywanie problemów
- Załącznik A
- Załącznik B
- Załącznik C
- Indeks
Załącznik C
161
C
Original SSLeay License C
Copyright © 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was
written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared
to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc.,
code; not just the SSL code. The SSL documentation included with this distribution is covered by the same
copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this
package is used in a product, Eric Young should be given attribution as the author of the parts of the library
used. This can be in the form of a textual message at program startup or in documentation (online or textual)
provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that
the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgement: "This product includes cryptographic software written by Eric Young
(eay@cryptsoft.com)" The word 'cryptographic' can be left out if the rouines from the library being used are
not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code)
you must include an acknowledgement: "This product includes software written by Tim Hudson
(tjh@cryptsoft.com)"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be
changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU
Public Licence.]