User's Guide
Table Of Contents
- USER'S GUIDE MFC-8220
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Loading paper and original documents
- 3 On-screen programming
- 4 Getting started
- Initial Setup
- General Setup
- Setting the Mode Timer
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Handset Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Turning on Automatic Daylight Savings Time
- Toner Save
- Sleep Time
- Setting the LCD Contrast
- Setting the Tray Use for Copy mode
- Setting the Tray Use for Fax mode
- 5 Setup Receive
- 6 Setup Send
- 7 Auto Dial numbers and dialing options
- 8 Remote Fax Options
- 9 Printing reports
- 10 Making copies
- 11 Important information
- Standard telephone and FCC Notices These notices are in effect on models sold and used only in the United States.
- Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Industry Canada Compliance Statement (Canada only)
- For your safety
- Disconnect device
- Laser safety
- FDA regulations
- Important safety instructions
- Trademarks
- Shipment of the MFC
- 12 Troubleshooting and routine maintenance
- 13 Optional accessories
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother USA/CAN
12 - 25 TROUBLESHOOTING AND ROUTINE MAINTENANCE
Replacing the toner cartridge
The MFC can print up to 6,700 pages using a high yield toner
cartridge (TN-570). When the toner cartridge is running low, the LCD
shows
Toner Low
. The MFC is supplied with a standard toner
cartridge (TN-540) that must be replaced after approximately 3,500
pages. Actual page count will vary depending on your average type
of original document (i.e., standard letter, detailed graphics).
Discard the used toner cartridge according to local regulations,
keeping it separate from domestic waste. Be sure to seal the toner
cartridge tightly so toner powder does not spill out of the cartridge. If
you have questions, call your local waste disposal office.
We recommend that you clean the MFC when you replace the toner
cartridge.
It is a good idea to keep a new toner cartridge ready for use
when you see the
Toner Low
warning.