User Manual
Table Of Contents
- USER’S GUIDE MFC-8460N/MFC-8860DN
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I : General
- 1 General information
- Using the documentation
- Accessing the complete User’s Guide
- Viewing documentation
- Viewing documentation (Windows®)
- How to find Scanning instructions
- Software User's Guide:
- PaperPort® User's Guide:
- How to find Internet FAX instructions (MFC-8860DN only)
- Viewing Documentation (Macintosh®)
- How to find Scanning instructions
- Software User's Guide:
- Presto!® PageManager® User's Guide:
- How to find Internet FAX instructions (MFC-8860DN only)
- Viewing documentation
- Control panel overview
- 2 Loading documents and paper
- 3 General setup
- 4 Security features
- 1 General information
- Section II : Fax
- 5 Sending a fax
- How to fax
- Broadcasting
- Additional sending operations
- 6 Receiving a fax
- 7 Phone and external devices
- 8 Dialling and storing numbers
- 9 Remote fax options
- 10 Printing reports
- 11 Polling
- 5 Sending a fax
- Section III : Copy
- Section IV : Software
- Section V : Appendices
- A : Safety and Legal
- B : Options
- C : Troubleshooting and routine maintenance
- D : Menu and Features
- E : Specifications E
- F : Glossary
- Index
- brother IND
Chapter 2
14
Loading paper and
other media 2
When printing on plain paper 60 to 105 gsm
(16 to 28 lb) or laser transparencies use the
paper tray.
For printing on other types of media use the
MP tray (Multi-purpose tray).
Loading paper 2
a Unfold the output paper tray support
flap.
b Pull the paper tray completely out of the
machine.
c While pressing the blue paper-guide
release lever (1), slide the paper guides
to fit the paper size.
Press the lever (2) located at the back of
the tray and pull out or push in the back
of the paper tray to fit the paper size.
Move the tray lock button (3) to the lock
position.
d Fan the stack of paper well to avoid
paper feeding problems.
e Insert the paper into the paper tray with
the top edge of the paper first and the
print side down.
Make sure that the paper is flat in the
tray and below the maximum paper
mark (1).
f Push the paper tray firmly back into the
machine.
(2)
(3)
(1)
1