User Manual
Table Of Contents
- USER’S GUIDE MFC-8460N/MFC-8860DN
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I : General
- 1 General information
- Using the documentation
- Accessing the complete User’s Guide
- Viewing documentation
- Viewing documentation (Windows®)
- How to find Scanning instructions
- Software User's Guide:
- PaperPort® User's Guide:
- How to find Internet FAX instructions (MFC-8860DN only)
- Viewing Documentation (Macintosh®)
- How to find Scanning instructions
- Software User's Guide:
- Presto!® PageManager® User's Guide:
- How to find Internet FAX instructions (MFC-8860DN only)
- Viewing documentation
- Control panel overview
- 2 Loading documents and paper
- 3 General setup
- 4 Security features
- 1 General information
- Section II : Fax
- 5 Sending a fax
- How to fax
- Broadcasting
- Additional sending operations
- 6 Receiving a fax
- 7 Phone and external devices
- 8 Dialling and storing numbers
- 9 Remote fax options
- 10 Printing reports
- 11 Polling
- 5 Sending a fax
- Section III : Copy
- Section IV : Software
- Section V : Appendices
- A : Safety and Legal
- B : Options
- C : Troubleshooting and routine maintenance
- D : Menu and Features
- E : Specifications E
- F : Glossary
- Index
- brother IND
Phone and external devices
49
7
Turning on the remote codes 7
You need to turn the Remote Codes setting to
on to use the Fax Receive Code and
Telephone Answer Code.
a Make sure you are in Fax mode .
b Press Menu 2, 1, 4.
21.Setup Receive
4.Remote Codes
a On
b Off
Select ab & OK
c Press a or b to select On.
d If you don’t want to change the Fax
Receive Code, Press OK.
e If you don’t want to change the
Telephone Answer Code, Press OK.
f Press Stop/Exit.
Changing the remote codes 7
The preset fax receive code is l51. The
preset telephone answer code is #51. If you
are always disconnected when accessing
your external TAD, try changing the three
digit remote codes, for example ### and 555.
a Make sure you are in Fax mode .
b Press Menu 2, 1, 4.
21.Setup Receive
4.Remote Codes
a On
b Off
Select ab & OK
c Press a or b to select On or Off.
Press OK.
d If you selected On in c, enter the new
fax receive code. Press OK.
e Enter the new telephone answer code.
Press OK.
f Press Stop/Exit.