Quick Start Manual

6
1
Push the lever (1) up to unlock the scanner.
(The gray scanner lock lever is located at
the back left side, under the document cover
(2).)
Do not connect the Parallel or USB
cable yet.
1
Make sure that the power switch is off.
Connect the AC power cord to the machine.
2
Plug the AC power cord into an AC outlet.
Turn the power switch on.
3
Connect one end of the telephone line cord
to the jack on the machine marked LINE
and the other end to a modular wall jack.
3
Release the Scanner
Lock
(2)
(1)
4
Install the Power Cord
and Phone Line
If Scanner Locked appears on the LCD,
immediately release the scanner lock and
press Stop/Exit.
Step 1
Setting Up the machine