Basic User's Guide

150
7.Network
(MFC-8710DW)
(Continued)
2.WLAN
(Continued)
1.TCP/IP
(Continued)
0.IPv6 — On
Off*
Enable or Disable
the IPv6 protocol. If
you want to use the
IPv6 protocol, visit
http://solutions.
brother.com/ for
more information.
See .
2.Setup Wizard — — — You can configure
your internal print
server.
3.WPS/AOSS — — — You can easily
configure your
wireless network
settings using the
one-button push
method.
4.WPS w/PIN Code — — — You can easily
configure your
wireless network
settings using
WPS with a PIN
code.
5.WLAN Status 1.Status — Active(11n)
Active(11b)
Active(11g)
Wired LAN Active
WLAN OFF
AOSS Active
Connection Fail
You can see the
current wireless
network status.
2.Signal — Strong
Medium
Weak
None
You can see the
current wireless
network signal
strength.
3.SSID — — You can see the
current SSID.
4.Comm. Mode — Ad-hoc
Infrastructure
You can see the
current
Communication
Mode.
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions Page
See Network User's Guide.
Please go to the Brother Solutions Center to download the manual at http://solutions.brother.com/
.
 The factory settings are shown in Bold with an asterisk.
 LDAP, Internet Fax and Scan to E-mail Server functions are available as a download.
 To use these functions, please download the necessary software from our web site, the Brother
Solutions Center at http://solutions.brother.com/
.
 Level 2 menus inside parentheses appear if you download IFAX/E-mail options to your machine.