Basic User's Guide

158
7.Network
(MFC-8810DW
and
MFC-8910DW)
(Continued)
1.Wired LAN
(Continued)
1.TCP/IP
(Continued)
8.DNS Server — Primary
[000-255].
[000-255].
[000-255].
[000-255]
Secondary
[000-255].
[000-255].
[000-255].
[000-255]
Specifies the IP
address of the
primary or
secondary DNS
server.
See .
9.APIPA — On*
Off
Automatically
allocates the IP
address from the
link-local address
range.
0.IPv6 — On
Off*
Enable or Disable
the IPv6 protocol. If
you want to use the
IPv6 protocol, visit
http://solutions.
brother.com/ for
more information.
2.Ethernet ——Auto*
100B-FD
100B-HD
10B-FD
10B-HD
Chooses the
Ethernet link
mode.
3.Wired Status —— Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFF
You can see the
current wired
status.
4.MAC Address ——— Shows the MAC
address of the
machine.
5.Set to Default ——1.Reset
2.Exit
Restore the wired
network setting to
factory default.
6.Wired Enable ——On*
Off
Enable or Disable
the Wired LAN
manually.
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions Page
See Network User's Guide.
Please go to the Brother Solutions Center to download the manual at http://solutions.brother.com/
.
The factory settings are shown in Bold with an asterisk.