User Manual
Table Of Contents
- Quick Setup Guide MFC-8870DW
- Symbols used in this guide
- Table of Contents
- Getting Started
- STEP 1 Setting Up the Machine
- 1 Install the drum and toner cartridge unit assembly
- 2 Load paper in the paper tray
- 3 Release the scanner lock
- 4 Install the power cord and phone line
- 5 Setting the date and time
- 6 Setting your station ID
- 7 Tone and pulse dialling mode
- 8 Setting the phone line type
- 9 Selecting a receive mode
- 10 Setting the LCD contrast
- STEP 2 Installing the Driver & Software
- Supplied CD-ROM ‘MFL-Pro Suite’
- Windows®
- For USB Interface Cable Users (For Windows® 98/98SE/Me/2000 Professional/XP/ XP Professional x64 Edition)
- For Parallel Interface Cable Users (For Windows® 98/98SE/Me/2000 Professional/XP/ XP Professional x64 Edition)
- For Windows NT® Workstation Version 4.0 Users (For Parallel Interface Cable Users)
- For Wired Network Interface Users (For Windows® 98/98SE/Me/NT/2000 Professional/XP/ XP Professional x64 Edition)
- For Wireless Network Users (For Windows® 98/98SE/Me/NT/2000 Professional/XP/ XP Professional x64 Edition in infrastructure mode)
- Macintosh®
- For Network Users
- Installing the BRAdmin Professional configuration utility (For Windows® users)
- Setting your IP address, Subnet Mask and Gateway using BRAdmin Professional (For Windows® users)
- BRAdmin Light configuration utility (For Mac OS® X users)
- How to set the machine’s network settings to wireless LAN or wired LAN
- Restoring the network settings to factory default
- Options and Consumables
- brother UK/IRE/SAF
Installing the Driver & Software
35
Macintosh
®
Macintosh
®
USB
Improper Setup
DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
8 Plug in the power cord and turn on the
machine.
9 Choose USB and then click OK.
10 Click Go, then Applications.
11 Double-click the Utilities folder.
12 Double-click the Printer Setup Utility icon.
Note
For Mac OS
®
X 10.2.x users, open Print Center
icon.
13 Click Add.
For Mac OS
®
X 10.2.4 to 10.3.x users
iGo to step 14.
For Mac OS
®
X 10.4 usersiGo to step 15.
14 Choose USB.