User Manual
Table Of Contents
- Quick Setup Guide MFC-8870DW
- Symbols used in this guide
- Table of Contents
- Getting Started
- STEP 1 Setting Up the Machine
- 1 Install the drum and toner cartridge unit assembly
- 2 Load paper in the paper tray
- 3 Release the scanner lock
- 4 Install the power cord and phone line
- 5 Setting the date and time
- 6 Setting your station ID
- 7 Tone and pulse dialling mode
- 8 Setting the phone line type
- 9 Selecting a receive mode
- 10 Setting the LCD contrast
- STEP 2 Installing the Driver & Software
- Supplied CD-ROM ‘MFL-Pro Suite’
- Windows®
- For USB Interface Cable Users (For Windows® 98/98SE/Me/2000 Professional/XP/ XP Professional x64 Edition)
- For Parallel Interface Cable Users (For Windows® 98/98SE/Me/2000 Professional/XP/ XP Professional x64 Edition)
- For Windows NT® Workstation Version 4.0 Users (For Parallel Interface Cable Users)
- For Wired Network Interface Users (For Windows® 98/98SE/Me/NT/2000 Professional/XP/ XP Professional x64 Edition)
- For Wireless Network Users (For Windows® 98/98SE/Me/NT/2000 Professional/XP/ XP Professional x64 Edition in infrastructure mode)
- Macintosh®
- For Network Users
- Installing the BRAdmin Professional configuration utility (For Windows® users)
- Setting your IP address, Subnet Mask and Gateway using BRAdmin Professional (For Windows® users)
- BRAdmin Light configuration utility (For Mac OS® X users)
- How to set the machine’s network settings to wireless LAN or wired LAN
- Restoring the network settings to factory default
- Options and Consumables
- brother UK/IRE/SAF
For Network Users
53
Setting your IP address, Subnet Mask and Gateway using BRAdmin
Professional (For Windows
®
users)
1 Start BRAdmin Professional, and choose
TCP/IP.
2 Click Devices, then Search Active Devices.
BRAdmin searches for new devices
automatically.
3 Double-click the new device.
Note
The default password for the print server is
“access”. You can use BRAdmin Professional or
a web browser to change this password.
4 Enter the IP Address, Subnet Mask and
Gateway, and then click OK.
5 The address information will be saved to the
machine.
Note
You can use the BRAdmin Professional utility to
set a password. (See the Network User’s Guide on
the CD-ROM.)