User Manual
Table Of Contents
- Windows Vista™ Installation Guide MFC-8870DW
- Symbols used in this guide
- Table of Contents
- Before Starting
- STEP 2 Installing the Driver & Software
- For USB Interface Users
- For Wired Network Interface Users
- For Wireless Network Interface Users
- Connecting your wireless machine and wireless network together in infrastructure mode and installing the printer driver in infrastructure mode
- Using the SecureEasySetup™ software to configure your machine for a wireless network
- Using the Setup Wizard from the control panel LAN menu for wireless network configuration
- For Network Users
- Other Information
- brother USA/CAN
Installing the Driver & Software
14
STEP 2
Windows
®
Windows
®
Wireless
Network
5 The wireless network connection status using
the SecureEasySetup™ software will be
displayed: Connecting WLAN, Connected or
Connection Error.
Connecting WLAN is displayed when the
print server is trying to make connections to
your router or access point. Wait till either
Connected or Connection Error is
displayed.
Connected is displayed when the print server
is successfully connected to your router or
access point. You can now use your machine
in a wireless network.
Connection Error is displayed when the
print server has not successfully connected to
your router or access point. Try starting from
step 2 again. If the same message is displayed
again, reset the print server back to the default
factory settings and try again.
Wireless setup is now complete. To install
the MFL-Pro suite, continue to step 15 on
page 17.