Copier User Manual

Installing the Driver & Software

Macintosh

Wired

Network

For Wired Network Interface Users

For Mac OS

X 10.2.4 or greater

Important

Make sure that you have finished the

instructions from step 1 Setting Up the

Machine on page 4 to 11.

1 Switch off the machine, then disconnect the

machine from the power socket and from the

network.

2 Turn on your Macintosh

3 Put the supplied CD-ROM into your CD-ROM

drive.

4 Double-click the Start Here OSX icon to install

the drivers and MFL-Pro Suite. If the language

screen appears, choose your language.

5 Click MFL-Pro Suite to install.

6 Choose Wired Network Connection, and

then click Next. Follow the on-screen

instructions, and restart your Macintosh

7 After the DeviceSelector window appears,

connect the network interface cable to your

Macintosh

and then to the machine.

Note

The DeviceSelector window will not appear if you

have also connected a USB interface cable to the

machine before restarting your Macintosh

or if

you are overwriting a previously installed version

of the Brother Software. If you encounter this

problem continue but skip steps 9 to 12. After the

software installation is completed you should

choose your Brother machine from the Model pull-

down list in the main screen of ControlCenter2.

For details, see Chapter 10 in the Software User’s

Guide on the CD-ROM.