User Guide

Chapter 5
38
Checking and cancelling
waiting jobs 5
Check which jobs are still waiting in the
memory to be sent. If there are no jobs, the
LCD will show No Jobs Waiting. You can
cancel a fax job that is stored and waiting in
the memory.
a Press Menu, 2, 6.
26.Remaining Jobs
a #001 12:34 BROTHER
#002 15:00 BIC
b #003 17:30 ABCDEFG
Select ab & OK
The number of jobs still to be sent will be
displayed.
b Choose one of the options below:
 Press a or b to scroll though the
waiting jobs, press OK to select a
job, and then press 1 to cancel it.
 Press 2 to exit without cancelling.
c When you have finished, press
Stop/Exit.
Sending a fax manually 5
Manual transmission 5
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
a Make sure you are in Fax mode .
b Load your document.
c Pick up the handset of the external
phone and listen for a dial tone.
d Dial the fax number you want to call.
e When you hear the fax tone, press
Start.
Out of Memory message 5
If you get an Out of Memory message while
scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message while
scanning a subsequent page, you will have
the option to press Start to send the pages
scanned so far, or to press Stop/Exit to
cancel the operation
Note
If you get an Out of Memory message
while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See
Real time transmission on page 36.)