User Guide

Chapter 7
50
The inadvisable configuration is shown in
figure 1, and the recommended master/slave
configuration is shown in figure 2.
This new connection configuration can be
arranged by contacting BT, Kingston upon
Hull Telecommunications, your PBX
maintainer or a qualified telephone
installation company as appropriate. Simply
explained, the extension telephone circuit
should be terminated on a normal modular
plug (BT 431A style), which in turn should be
inserted into the modular socket of the white
“T”-shaped connector provided as part of the
line cord assembly.
Figure 1:
7
1 Extension socket
2 Master socket
3 Incoming line
Figure 2:
Recommended connection of extension
sockets
7
1 Extension socket
2 Master socket
3 Incoming line
These phones are now connected as external
devices as shown on page 49, because they
are connected to the fax machine via the T-
connector.
Using a cordless external
handset 7
If your cordless telephone is connected to the
telephone line cord (see page 49) and you
typically carry the cordless handset
elsewhere, it is easier to answer calls during
the Ring Delay.
If you let the machine answer first, you will
have to go to the machine so you can press
Tel/R to transfer the call to the cordless
handset.
Using remote codes 7
Fax Receive Code 7
If you answer a fax call on an extension or
external telephone, you can tell your machine
to receive it by dialling the fax receive code
l51. Wait for the chirping sounds then
replace the handset. See Fax Detect on page
42.
FAX
12
3
1
FAX
12
3
1