User Manual

Phone and external devices
51
7
These phones are now connected as external
devices as shown on page 49, because they
are connected to the fax machine via the T-
connector.
Using a cordless external
handset 7
If your cordless telephone is connected to the
telephone line cord (see page 49) and you
typically carry the cordless handset
elsewhere, it is easier to answer calls during
the Ring Delay.
If you let the machine answer first, you will
have to go to the machine so you can press
Tel/R to transfer the call to the cordless
handset.
Using remote codes 7
Fax Receive Code 7
If you answer a fax call on an extension or
external telephone, you can tell your machine
to receive it by dialling the fax receive code
l51. Wait for the chirping sounds then
replace the handset. See Fax Detect on page
42.
Telephone Answer Code 7
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T
(double) ring after the initial ring delay. If you
pick up the call on an extension phone you
can turn the F/T ring off by pressing #51
(make sure you press this between the rings).
Turning on the remote codes 7
You need to turn the Remote Codes setting to
on to use the Fax Receive Code and
Telephone Answer Code.
a Make sure you are in Fax mode .
b Press Menu 2, 1, 4.
21.Setup Receive
4.Remote Codes
a On
b Off
Select ab & OK
c Press a or b to select On.
d If you don’t want to change the Fax
Receive Code, Press OK.
e If you don’t want to change the
Telephone Answer Code, Press OK.
f Press Stop/Exit.