User Manual

11
11
Fax Transmission Report
Your Brother machine is equipped with a
Transmission Verification Report that can be used as
confirmation that you sent a fax. This report lists the
name or fax number of the receiving party, the date,
time and duration of the transmission, the number of
pages transmitted, and whether or not the
transmission was successful. If you want to use the
Fax Transmission Report feature see Printing reports
in the Advanced User's Guide.
12
Set tone or pulse dialling
mode
Your machine comes set for a Tone dialling service. If
you have a Pulse dialling service (rotary), you need to
change the dialling mode.
a Press Menu.
b Press a or b to display Initial Setup.
Press Initial Setup.
c Press a or b to display Tone/Pulse.
Press Tone/Pulse.
d Press Pulse (or Tone).
e Press Stop/Exit.
13
Set the telephone line
compatibility
If you are connecting the machine to a VoIP service
(over the Internet) you need to change the
compatibility setting.
a Press Menu.
b Press a or b to display Fax.
Press Fax.
c Press a or b to display Miscellaneous.
Press Miscellaneous.
d Press Compatibility.
e Press Basic(for VoIP).
f Press Stop/Exit.
14
Set the telephone line
type
If you are connecting the machine to a line that
features a PABX (PBX) or ISDN to send and receive
faxes, it is also necessary to change the phone line
type accordingly by completing the following steps.
a Press Menu.
b Press a or b to display Initial Setup.
Press Initial Setup.
c Press a or b to display Phone Line Set.
Press Phone Line Set.
d Press Normal, ISDN or PBX.
Do one of the following:
 If you choose ISDN or Normal, go to step h.
 If you choose PBX, go to step e.
e Do one of the following:
 If you want to change the current prefix
number, press On or Always and go to
step f.
 If you do not want to change the current
prefix number, go to step h.
Note
If you are using an analogue telephone line you
can skip this step.