User Manual

Chapter 1
2
Ecology features 1
Toner Save 1
You can save toner using this feature. When
you set Toner Save to On, prints appear
lighter. The default setting is Off.
a Press Menu.
b Press a or b to display
General Setup.
Press General Setup.
c Press a or b to display Ecology.
Press Ecology.
d Press Toner Save.
e Press On or Off.
f Press Stop/Exit.
Note
We do not recommend Toner Save for
printing Photo or Greyscale images.
Sleep Time 1
The Sleep mode setting can reduce power
consumption. When the machine is in Sleep
mode (Power Save mode) it acts as though it
is turned off. The machine will wake up and
start printing when it receives a print job.
You can choose how long the machine must
be idle before it goes into Sleep mode. The
timer will restart if any operation is carried out
on the machine, such as receiving a fax or a
print job. The default setting is 3 minutes.
When the machine goes into Sleep mode, the
LCD backlight turns off.
a Press Menu.
b Press a or b to display
General Setup.
Press General Setup.
c Press a or b to display Ecology.
Press Ecology.
d Press Sleep Time.
e Using the dial pad on the Touchscreen,
enter the length of time (0-90 minutes)
the machine will remain idle before
entering Sleep mode.
Press OK.
f Press Stop/Exit.