LDAP Operation Guide
Table Of Contents
- LDAP Operation Guide
- Applicable models
- Definitions of notes
- Trademarks
- IMPORTANT NOTE
- Table of Contents
- 1 Introduction
- 2 Configuration for LDAP using a Web Browser
- 3 Machine operation
- 4 Digital Certificate for Signed PDF
- 5 Troubleshooting
5
Configuration for LDAP using a Web Browser
2
Configuring your machine to communicate with your E-mail
server 2
You must also configure your Brother machine to communicate with your E-mail server.
a Start your web browser.
b Type “http://machine’s IP address/” into your browser's address bar (where “machine’s IP address” is the
IP address of the machine or the print server name).
For example: http://192.168.1.2/
c No password is required by default. If you have previously set a password, enter it and press .
d Click Network.
e Click Protocol.
f Make sure POP3/SMTP is checked and click Advanced Setting.