Operation Manual

Troubleshooting
119
B
Out of Memory The machine’s memory is full. Fax sending or copy operation in progress
Do one of the following:
 Press Send Now, Partial Print or
Quit to send or copy the scanned pages.
 Press and wait until the other
operations in progress finish, and then try
again.
 Clear the faxes from the memory.
Print the faxes that are stored in the
memory to restore the memory to 100%.
Then turn off Fax Storage to avoid storing
more faxes in the memory (see Advanced
User's Guide: Printing a fax from the
memory and Fax Storage).
Print operation in process
Do one of the following:
 Reduce the print resolution.
(See Software User's Guide.)
 Clear the faxes from the memory (see the
above explanation).
Out of Memory
Secure Print Data
is full. Press
Stop Key and
delete the
previously stored
data.
The machine’s memory is full.
Press and delete the previously stored
secure print data.
Print Unable XX The machine has a mechanical
problem.
Do one of the following:
 Press and hold down to turn the
machine off, wait a few minutes, and then
turn it on again (see Transferring your faxes
or Fax Journal report on page 123).
 If the problem continues, contact Brother
customer service for support.
Error Message Cause Action