User Manual

Making copies
61
7
Adjusting the Colour
Saturation 7
You can change the default setting for colour
saturation.
a Load your document.
b Press (Copy).
c Enter the number of copies.
d Press Options.
e Swipe up or down, or press a or b to
display Colour Adjust.
f Press Colour Adjust.
g Press Red, Green or Blue.
h Press a level of colour saturation.
i Repeat steps g and h if you want to
adjust the next colour.
After adjusting the colour settings,
press .
j If you do not want to change additional
settings, press OK.
k Press Colour Start.
Making 2-sided N in 1 copies
(MFC-9340CDW) 7
When you make 2-sided N in 1 copies from a
2-sided document, you must choose a layout
option in 2-sided Copy Page Layout.
You will be able to access 2-sided Copy
Page Layout after selecting
2-sided2-sided for 2-sided Copy
and any N in 1 layout for Page Layout.
You must select an appropriate option in the
table.
IMPORTANT
• Load your document in the ADF to use the
2-sided Copy Page Layout feature.
• The 2-sided Copy Page Layout
feature does not work when you choose
2in1(ID) for Page Layout.
a Load your document in the ADF.
b Press (Copy).
c Enter the number of copies.
d Press Options.
e Select 2-sided2-sided in
2-sided Copy (see 2-sided Copying
on page 55).
Bound
Edge of the
Document
Edge of the
copies to
be bound
Option you
must choose
Long Edge Long Edge LongEdge
LongEdge
Short Edge LongEdge
ShortEdge
Short Edge Long Edge ShortEdge
LongEdge
Short Edge ShortEdge
ShortEdge