User Manual

Chapter 2
10
Setting Lock 2
Setting Lock lets you set a password to stop
other people from accidentally changing your
machine settings.
Make a careful note of your password. If you
forget it, you will have to reset the passwords
stored in the machine. Contact your
administrator or Brother customer service.
While the Setting Lock is On, you cannot
access the machine settings.
Machine settings cannot be changed through
the Remote Setup utility while Setting Lock
is On.
Setting up the administrator
password 2
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display Security.
f Press Security.
g Press Setting Lock.
h Enter a four-digit number for the new
password using the keyboard on the
Touchscreen.
Press OK.
i Enter the new password again when the
Touchscreen shows Verify:.
Press OK.
j Press .