User Manual

16
3
Additional sending
options
3
Sending faxes using multiple
settings 3
Before you send a fax, you can change any
combination of these settings:
 Contrast
 Fax Resolution
 Real Time TX
 Overseas Mode
 Delayed Fax
 Batch TX
 Coverpage Message
 Coverpage Setup
 Broadcasting
a Do one of the following:
 When Fax Preview is set to Off,
press (Fax).
 When Fax Preview is set to On, press
(Fax) and
Sending Fax(es).
The Touchscreen shows:
b Press Options.
c Swipe up or down, or press a or b to
display the setting you want, and then
press the setting.
d Press the option you want.
e Do one of the following:
 Repeat steps c and d to change
more settings.
 If you are finished choosing settings,
press OK. Go to the next step for
sending your fax.
NOTE
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as the
default settings. These settings will stay
until you change them again (see Setting
your changes as the new default
on page 23).
• You can also save some of the settings
you use most often by setting them as a
Shortcut (see Saving fax options as a
Shortcut on page 24).
Sending a fax 3