User Manual
Table Of Contents
- Advanced User’s Guide MFC-9330CDW
- User’s Guides and where do I find them?
- Table of Contents
- 1 General Setup
- 2 Security features
- 3 Sending a fax
- Additional sending options
- Additional sending operations
- Sending a fax manually
- Sending a fax at the end of a conversation
- Dual access
- Broadcasting
- Real Time Transmission
- Overseas Mode
- Delayed Fax
- Delayed batch transmission
- Checking and canceling waiting jobs
- Setting your changes as the new default
- Restoring all fax settings to the factory settings
- Saving fax options as a Shortcut
- Electronic cover page
- Destination Display
- Polling
- 4 Receiving a fax
- Memory Receive Options
- Remote retrieval
- Additional receiving operations
- Polling
- 5 Dialing and storing numbers
- 6 Printing reports
- 7 Making copies
- A Routine maintenance
- Cleaning and checking the machine
- Cleaning the outside of the machine
- Cleaning the LED heads
- Cleaning the scanner
- Cleaning the corona wires
- Cleaning the drum unit
- Cleaning the paper pick-up rollers
- Calibration
- Auto Registration
- Frequency (Color Correction)
- Printing the test print
- Checking the Page Counters
- Checking the remaining life of toner cartridges
- Checking the remaining life of parts
- Replacing periodic maintenance parts
- Packing and shipping the machine
- Cleaning and checking the machine
- B Glossary
- Index
Chapter 7
58
Adjusting the Color
Saturation 7
You can change the default setting for color
saturation.
a Load your document.
b Press (Copy).
c Enter the number of copies.
d Press Options.
e Swipe up or down, or press a or b to
display Color Adjust.
f Press Color Adjust.
g Press Red, Green or Blue.
h Press a level of color saturation.
i Repeat steps g and h if you want to
adjust the next color.
After adjusting the color settings,
press .
j If you do not want to change additional
settings, press OK.
k Press Color Start.
Removing Background Color 7
Remove Background Color removes the
background color of the document when
copying. Using this function will make the
copy clearer to read and may save toner.
NOTE
This function is for use only when making
color copies.
a Load your document.
b Press (Copy).
c Enter the number of copies.
d Press Options.
e Swipe up or down, or press a or b to
display Advanced Settings.
f Press Advanced Settings.
g Press Remove Background Color.
h Press Low, Medium or High.
i If you do not want to change additional
settings, press OK.
j Press Color Start.