User Manual
Table Of Contents
- Advanced User’s Guide MFC-9330CDW
- User’s Guides and where do I find them?
- Table of Contents
- 1 General Setup
- 2 Security features
- 3 Sending a fax
- Additional sending options
- Additional sending operations
- Sending a fax manually
- Sending a fax at the end of a conversation
- Dual access
- Broadcasting
- Real Time Transmission
- Overseas Mode
- Delayed Fax
- Delayed batch transmission
- Checking and canceling waiting jobs
- Setting your changes as the new default
- Restoring all fax settings to the factory settings
- Saving fax options as a Shortcut
- Electronic cover page
- Destination Display
- Polling
- 4 Receiving a fax
- Memory Receive Options
- Remote retrieval
- Additional receiving operations
- Polling
- 5 Dialing and storing numbers
- 6 Printing reports
- 7 Making copies
- A Routine maintenance
- Cleaning and checking the machine
- Cleaning the outside of the machine
- Cleaning the LED heads
- Cleaning the scanner
- Cleaning the corona wires
- Cleaning the drum unit
- Cleaning the paper pick-up rollers
- Calibration
- Auto Registration
- Frequency (Color Correction)
- Printing the test print
- Checking the Page Counters
- Checking the remaining life of toner cartridges
- Checking the remaining life of parts
- Replacing periodic maintenance parts
- Packing and shipping the machine
- Cleaning and checking the machine
- B Glossary
- Index
66
c Clean the corona wire inside the drum
unit by gently sliding the green tab from
left to right and right to left several times.
NOTE
Be sure to return the tab to the Home
position (a) (1). The arrow on the tab must
be aligned with the arrow on the drum unit.
If it is not, printed pages may have a
vertical stripe.
d Slide the toner cartridge and drum unit
assembly into the machine. Make sure
you match the toner cartridge color to
the same color label on the machine.
BK = Black, C = Cyan,
M = Magenta, Y= Yellow
1
BK
C
M
Y










