User Manual
Table Of Contents
- Advanced User’s Guide MFC-9330CDW
- User’s Guides and where do I find them?
- Table of Contents
- 1 General Setup
- 2 Security features
- 3 Sending a fax
- Additional sending options
- Additional sending operations
- Sending a fax manually
- Sending a fax at the end of a conversation
- Dual access
- Broadcasting
- Real Time Transmission
- Overseas Mode
- Delayed Fax
- Delayed batch transmission
- Checking and canceling waiting jobs
- Setting your changes as the new default
- Restoring all fax settings to the factory settings
- Saving fax options as a Shortcut
- Electronic cover page
- Destination Display
- Polling
- 4 Receiving a fax
- Memory Receive Options
- Remote retrieval
- Additional receiving operations
- Polling
- 5 Dialing and storing numbers
- 6 Printing reports
- 7 Making copies
- A Routine maintenance
- Cleaning and checking the machine
- Cleaning the outside of the machine
- Cleaning the LED heads
- Cleaning the scanner
- Cleaning the corona wires
- Cleaning the drum unit
- Cleaning the paper pick-up rollers
- Calibration
- Auto Registration
- Frequency (Color Correction)
- Printing the test print
- Checking the Page Counters
- Checking the remaining life of toner cartridges
- Checking the remaining life of parts
- Replacing periodic maintenance parts
- Packing and shipping the machine
- Cleaning and checking the machine
- B Glossary
- Index
74
d Tightly wring out a lint-free cloth soaked
in lukewarm water, and then wipe the
separator pad (1) on the paper tray to
remove dust.
e Wipe the two pick-up rollers (1) inside
the machine to remove dust.
f Reload the paper and put the paper tray
back in the machine.
g Press to turn on the machine.
Calibration A
The output density for each color may vary
depending on the machine’s environment,
such as temperature and humidity.
Calibration helps you to improve the color
density.
a Press .
b Press Calibration.
c Press Calibrate.
d Press Yes to confirm.
e Touchscreen will show Completed.
f Press .
You can reset the calibration parameters
back to those set at the factory.
a Press .
b Press Calibration.
c Press Reset.
d Press Yes to confirm.
e Touchscreen will show Completed.
f Press .
1
1