User Manual
Table Of Contents
- Advanced User’s Guide MFC-9330CDW
- User’s Guides and where do I find them?
- Table of Contents
- 1 General Setup
- 2 Security features
- 3 Sending a fax
- Additional sending options
- Additional sending operations
- Sending a fax manually
- Sending a fax at the end of a conversation
- Dual access
- Broadcasting
- Real Time Transmission
- Overseas Mode
- Delayed Fax
- Delayed batch transmission
- Checking and canceling waiting jobs
- Setting your changes as the new default
- Restoring all fax settings to the factory settings
- Saving fax options as a Shortcut
- Electronic cover page
- Destination Display
- Polling
- 4 Receiving a fax
- Memory Receive Options
- Remote retrieval
- Additional receiving operations
- Polling
- 5 Dialing and storing numbers
- 6 Printing reports
- 7 Making copies
- A Routine maintenance
- Cleaning and checking the machine
- Cleaning the outside of the machine
- Cleaning the LED heads
- Cleaning the scanner
- Cleaning the corona wires
- Cleaning the drum unit
- Cleaning the paper pick-up rollers
- Calibration
- Auto Registration
- Frequency (Color Correction)
- Printing the test print
- Checking the Page Counters
- Checking the remaining life of toner cartridges
- Checking the remaining life of parts
- Replacing periodic maintenance parts
- Packing and shipping the machine
- Cleaning and checking the machine
- B Glossary
- Index
Routine maintenance
75
A
NOTE
• If an error message appears, press OK
and try again.
(For more information, see
Basic User's Guide: Error and
maintenance messages.)
• If you are using the Windows
®
printer
driver, the driver will get the calibration
data automatically if both
Use Calibration Data and Get Device
Data Automatically are selected. The
factory settings are on (see
Software User's Guide).
• If you are using the Macintosh printer
driver, you must perform the calibration
using the Status Monitor. Turn on the
Status Monitor, and then select
Color Calibration from the Control menu
(see Software User's Guide).
Auto Registration A
If solid areas of color or images have cyan,
magenta or yellow fringes, you can use the
auto-registration feature to correct the
problem.
a Press .
b Press Auto Regist..
c Press Yes to confirm.
d Touchscreen will show Completed.
e Press .