Network User's Guide
Table Of Contents
- Network User’s Guide
- Applicable models
- Definitions of notes
- IMPORTANT NOTE
- Table of Contents
- Section I: Network Operation
- 1 Introduction
- 2 Changing your machine’s network settings
- 3 Configuring your machine for a wireless network (For HL-3180CDW, DCP-9015CDW, DCP-9020CDW, MFC-9130CW, MFC-9330CDW and MFC-9340CDW)
- Overview
- Confirm your network environment
- Wireless configuration temporarily using a USB cable (Recommended)
- Configuration using the machine’s control panel Setup Wizard
- One push configuration using WPS (Wi-Fi Protected Setup) or AOSS™
- Configuration using the PIN Method of WPS (Wi-Fi Protected Setup)
- Configuration in Ad-hoc mode
- 4 Control panel setup
- Network menu
- TCP/IP
- Ethernet (wired network only)
- Wired Status (For HL-3180CDW, DCP-9015CDW, DCP-9020CDN, DCP-9020CDW, MFC-9140CDN, MFC-9330CDW and MFC-9340CDW)
- Setup Wizard (wireless network only)
- WPS (Wi-Fi Protected Setup)/AOSS™ (wireless network only)
- WPS (Wi-Fi Protected Setup) w/PIN Code (wireless network only)
- WLAN Status (For HL-3180CDW, DCP-9015CDW, DCP-9020CDW, MFC-9130CW, MFC-9330CDW and MFC-9340CDW)
- MAC Address
- Set to Default
- Wired Enable (For DCP-9020CDW, MFC-9330CDW and MFC-9340CDW)
- WLAN Enable
- E-mail / IFAX (MFC-9130CW, MFC-9140CDN, MFC-9330CDW and MFC-9340CDW: available as a download)
- Fax to Server (MFC-9130CW, MFC-9140CDN, MFC-9330CDW and MFC-9340CDW: available as a download)
- How to set a new default for Scan to FTP
- How to set a new default for Scan to Network (Windows®)
- Reset the network settings to the factory default
- Printing the Network Configuration Report
- Printing the WLAN report (For HL-3180CDW, DCP-9015CDW, DCP-9020CDW, MFC-9130CW, MFC-9330CDW and MFC-9340CDW)
- Function table and default factory settings
- Network menu
- 5 Web Based Management
- Overview
- How to configure the machine settings using Web Based Management (web browser)
- Setting a password
- Secure Function Lock 2.0
- Synchronize with SNTP server
- Store Print Log to Network
- Changing the Scan to FTP configuration using a web browser
- Changing the Scan to Network configuration using a web browser (Windows®)
- 6 Internet fax (MFC-9130CW, MFC-9140CDN, MFC-9330CDW and MFC-9340CDW: available as a download)
- 7 Security features
- Overview
- Using Certificates for device security
- Managing multiple certificates
- Managing your network machine securely using SSL/TLS
- Secure Management using BRAdmin Professional 3 (Windows®)
- Printing documents securely using SSL/TLS
- Sending or Receiving an E-mail securely
- Using IEEE 802.1x authentication
- 8 Troubleshooting
- Section II: Network Glossary
- 9 Types of network connections and protocols
- 10 Configuring your machine for a network
- 11 Wireless network terms and concepts (For HL-3180CDW, DCP-9015CDW, DCP-9020CDW, MFC-9130CW, MFC-9330CDW and MFC-9340CDW)
- 12 Additional network settings from Windows®
- Types of additional network settings
- Installing drivers used for printing and scanning via Web Services (Windows Vista®, Windows® 7 and Windows® 8)
- Uninstalling drivers used for printing and scanning via Web Services (Windows Vista®, Windows® 7 and Windows® 8)
- Network printing and scanning installation for Infrastructure mode when using Vertical Pairing (Windows® 7 and Windows® 8)
- 13 Security terms and concepts
- Section III: Appendixes
- Index
Troubleshooting
110
8
Did your previous printing
job fail?
wired/
wireless
If the failed printing job is still in the print queue of your computer, delete it.
Otherwise, try one of the following:
(Windows
®
XP/Windows Vista
®
/ Windows
®
7/Windows Server
®
2003)
Double-click the printer icon in the following folder and then choose Cancel
All Documents in the Printer menu:
(Windows
®
XP/Windows Server
®
2003)
Start and Printers and Faxes.
(Windows Vista
®
)
, Control Panel, Hardware and Sound, and then Printers.
(Windows
®
7)
, Devices and Printers, and then Printers and Faxes.
(Windows
®
8)
Move your mouse to the lower right corner of your desktop. When the menu
bar appears, click Settings, and then click Control Panel. In the Hardware
and Sound group, click View devices and printers. Right-click your
Brother machine, select See what’s printing, and then select your printer
driver.
(Windows Server
®
2008)
Start, Control Panel and Printers.
(Windows Server
®
2012)
Move your mouse to the lower right corner of your desktop. When the menu
bar appears, click Settings, and then click Control Panel. In the Hardware
group, click View devices and printers. Right-click your Brother machine,
select See what’s printing, and then select your printer driver.
Are you connecting the
Brother machine to the
network using wireless
capabilities?
wireless Print the WLAN report to confirm the state of the wireless connection.
(For how to print, see Printing the WLAN report (For HL-3180CDW,
DCP-9015CDW, DCP-9020CDW, MFC-9130CW, MFC-9330CDW and
MFC-9340CDW) on page 48.)
If there is an error code on the printed WLAN report: see Quick Setup
Guide: Troubleshooting.
See The Brother machine is not found on the network during MFL-Pro
Suite installation. on page 107.
I have checked and tried all
of above, however the
Brother machine does not
print/scan. Is there anything
else I can do?
wired/
wireless
Uninstall MFL-Pro Suite and reinstall it.
The Brother machine cannot print or scan over the network.
The Brother machine is not found on the network even after successful installation. (continued)
Question Interface Solution